JVC KD-LX10 Service Manual page 3

Disassembly method
Removing the top chassis
1. Remove the two screws A
cover to the top chassis on the bottom of the body.
2. Remove the two screws B attaching the top chassis
on both sides of the body.
3. Remove the two screws C
attaching the heat sink on the left side of the body.
4. Remove the two screws E and the screw F on the
back of the body.
5.
Remove the two screws G on the upper side of the
body.
6. Move the top chassis upward and disconnect the CD
mechanism connector from the main board
connector by pulling it. Remove the top chassis from
the body.
E
Fig.4-1 (KD-LX30)
E
Fig.4-2 (KD-LX10)
(See Fig.1 to 5)
attaching the bottom
and the two screw D
F
F
A
Fig.1
Fig.2
C
Heat sink
D
Fig.3
G
Fig.5
KD-LX10/KD-LX30
Bottom cover
A
Top chassis
B
Top chassis
B
Top chassis
G
2-1