Overview; Tools - Epson Stylus NX125 Service Manual

Epson Stylus NX125/T13/NX130 series

1.1 Overview

This chapter describes procedures for disassembling the main components of NX125, T13 and NX130 series.
Unless otherwise specified, disassembled units or components can be reassembled by reversing the disassembly
procedure. Refer to
necessary when disassembling and assembling.
Read the " Safety Precautions (p3)"
When you have to remove components or parts that are not described in this chapter, see the exploded diagrams
of SPI (Service Parts Information).
In this chapter, the product names are called as follows:
 NX125 series: Epson Stylus NX125/NX127/TX120/TX125/TX123/SX125/TX121/TX121x/
 T13 series:
 NX130 series: Epson Stylus NX130/TX130/TX133/TX135/SX130/Epson ME 340

1.1.1 Tools

Use only specified tools to avoid damaging the printer.
(+) Phillips screwdriver #1
(+) Phillips screwdriver #2
Flathead screwdriver
Flathead Precision screwdriver #1
Tweezers
Longnose pliers
Acetate tape
Nippers
Note *: All of the tools listed above are commercially available.
EPSON provides the tools listed with EPSON part code.
Disassembly/Assembly
" 1.3 Details of Disassembling/Assembling by Parts/Unit (p16)"
before disassembling and assembling.
TX129/Epson ME 320/ME 330/ME 350
Epson Stylus T13/T13x/T12/N10/N11/T22/T25/S22/T22E/Epson ME 10/
ME 32/ME 33/ME 35
Name
Table 1-1. Tools
Overview
Revision F
for cautions and such if
EPSON Part Code*
1080530
---
---
---
---
---
1003963
---
Confidential
9