Panasonic AJ-HD3700H Operating Instructions Manual page 74

TC/CHR menu
∑ Time code displays and VTR's operating modes (continued)
VTR's operating modes
STOP
PREVIEW
REVIEW
PREROLL
AUTO EDIT (automatic editing)
JOG
VAR
SHTL
REC
REC
(display blinks during Pre-CTL operation) OUT PREVIEW
PLAY
P PLY (programmed playback)
TSO (TAPE SPEED OVERRIDE)
≥In the shuttle/variable mode and CUE UP and PREROLL modes, the tape travel direction is in-
dicated as "i" or "j", and the tape speed is displayed as an integer.
≥In the jog mode, the tape travel is indicated by "O" when it is moving in the forward direction,
by "¢" when it has stopped, and by "N" when it is moving in the reverse direction.
≥In the programmed playback and TSO modes, "i" or "j" is used to indicate the deviation di-
rection, and the deviation data is displayed as a percentage.
∑ Error information displays
Press the F12 (SUPER ER) key to set it ON.
The error information will now be displayed.
FAN STOP (fan stopped)
ERASE ERROR (erase current stopped)
COMP.CPU ERROR
(error in communication with CPU)
CONCEAL SW OFF
(conceal SW at "OFF" position)
ECC SW OFF (ECC SW at "OFF" position)
SERVO UNLOCK (no servo lock)
CTL NOT DET. (no CTL signal detection)
LOW RF (drop in RF level during recording) RS-422 ERROR (RS-422 system error)
CONCEAL V/A (video/audio error corrected) RS-232C ERROR (RS-232C system error)
CONCEAL A (audio error corrected)
CONCEAL V (video error corrected)
AUDIO MUTE (audio output muted)
HIGH ERROR (inner error value too high)
CTL HEAD CLOG (CTL head clogged)
LTC HEAD CLOG (LTC head clogged)
OPT ERROR (optimization system error)
F.FWD
REW
EDIT PLAY (edit playback)
EDIT REC (edit recording)
CUE UP
STANDBY OFF
EJECT
DMC PREVIEW
DMC EDIT
DMC SAMPLE
(variable memory speed sampling underway)
DMC PLAY (variable memory playback underway)
AUTO OFF
HD REF ERROR (no HD reference signal input)
SD REF ERROR (no SD reference signal input)
HD SDI ERROR (HD SDI signal error)
SD SDI ERROR (SD SDI signal error)
FREQ UNMATCH
(frequency settings fail to match)
VIDEO ERROR (video system error)
PCM ERROR (PCM signal system error)
VA-CONT ERROR (VA controller error)
TC ERROR (time code error occurred)
CARD LOW BATT
(low charge in front IC card battery)
SYSCON ERROR
(system control system error occurred)
MECHA ERROR
(mechanical system error occurred)
SERVO ERROR
(reel, drum or capstan error occurred)
SYSTEM ERROR (other error)
– 74 –