Panasonic AJ-HD3700H Operating Instructions Manual page 11

HOME menu displays
∑ Setting the initial value for the time code
(1) Press the center cursor key.
The display now appears in reverse video.
(2) Press the center cursor key again so that the cursor is made to serve as a column cursor,
and then use the number key to input the value.
1
0
F
(3) Press the ENT key.
The cursor is now cleared. (This completes the setting of the initial value.)
≥To clear the value entered, press the C key in step (2).
≥To check the value which has been input, press the INPUT CHECK key.
Center cursor key
To set a letter from A to F in the initial value of the user bit, simul-
0 0 0
taneously press the F key and the corresponding number key
(4 to 9).
0 0
9
LTCR
00 : 00 : 00 : 00
LUBR
10 : 00 : 00 : 0F
– 11 –