Canon IXUS 245 HS User Manual page 65

• Once a computer is added, the computer name will be displayed on the
screen in step 3. To connect to a computer again, simply choose the
computer name from the list.
• When a connection destination is set using the Touch Actions setting
(= 1 98), you can automatically access the function to connect to the last
connected destination from the next time by just dragging on the screen
without needing to perform the connection operation.
Connecting to a WPS Supported Access Point
WPS (Wi‑Fi Protected Setup) is a structure for simplifying settings when
connecting one wireless LAN device to another. You can use either
Push Button Configuration Method or PIN Method for settings on a WPS
supported device.
The push button configuration method is used in the following explanation.
• Refer to the user guide provided with your access point to check if it supports
WPS.
4
Choose [WPS Connection].
z z Touch [WPS Connection].
5
Choose [PBC Method].
z z Touch [PBC Method].
Connecting to a Computer
65