Table of Contents
Advertisement
•
Focusing may not be possible in some shooting conditions.
•
In low‑light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
•
If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter
button, and then press it halfway again.
•
AF lock shooting is not available.
•
[AF‑Point Zoom] on the [4] tab is not available.
•
Not available when using the self‑timer (= 1 00).
Choosing Subjects to Focus On (Touch AF)
You can shoot after the camera focuses on your selected subject, person's
face, or location shown on the screen.
Still Images
1
Choose a subject, a person's
face, or a location to focus on.
z
z
Touch the subject or person on the
screen.
When the AF frame mode is set to [Face
X
X
AiAF], the camera beeps and displays
[
] when a face is detected. Focus is
maintained even if the subject moves.
X
X
When the AF frame mode is set to
[1‑point], an AF frame is displayed where
you touched.
z
z
To cancel Touch AF, touch [^].
Shooting Range and Focusing
Movies
161
Hide quick links:
Advertisement
Table of Contents
