Operating Basics; Turning The Recorder On And Off; Setting The Date And Time - Navman MIVue 5 Series User Manual

Operating basics

Turning the recorder ON and OFF

Complete the installation according to the instructions in the "Using your recorder in a
vehicle" section.
ƒ Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will automatically start in a few seconds after start-up.
ƒ When a GPS fix is established, the
screen. The number of vertical bars in the icon indicates the strength of the signal.
ƒ When the recorder is on, press the Power key to switch the LCD screen on/off.
ƒ To manually turn the recorder on and off, press and hold the Power key for 2 seconds.

Setting the date and time

To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1. Press to access the Settings Menu.
2. Select System > Date / Time and press
3. Select Automatic or Manual:
ƒ When you select Automatic, the system will display the time zone setting screen.
Use /
date and time according to the time zone setting.
ƒ When you select Manual, the system will display the date and time setting screen.
Use /
until all fields have been changed. When completed, press
to select your time zone and press
to adjust the value of the selected field; press
icon will show on the top-right corner of the
.
. The system will set the correct
and repeat the step
.
9