Advertisement
Step 4. Remove the screws (24) and washers (05) from the main post (12). Connect the top
tension control cable (13) and bottom tension control cable (14). Then take off the part
(14A).
Next, connect the top computer cable (19) and the bottom computer cable (21). Slide
the main post (12) into the main frame (01) and secure it into place using screws (24)
and washers (05) provided.
Step 5. Remove the nut (35) and the washer (34) from the right arm of disc (9R). Insert the arm
of the disc (9R) into the hole of the right pedal tube (8R) and fix into place by tightening
the nut (35) and the washer (34). Repeat step 4 to install the left disc (9L) on the other
side.
7L
8L
14
21
19
29A
12
14A
13
19
5
34
24
35
1
9
- 2 -
19
21
14
13
14A
8R
35
34
Advertisement
