JETStream JEC-2000 Assembly Instruction Manual page 2

JEC-2000 ELLIPTICAL ASSEMBLY INSTRUCTION
Step 1. Unpack the box and place all the parts on the floor.
Step 2. Remove the bolts (04), nuts (06) and washers (05) from the front stabilizer and rear
stabilizer (02/03).
Attach the front stabilizer and rear stabilizer (02/03) to the main frame (01). Replace the
bolts, nuts and washers and tighten using the supplied spanner.
Step 3. Take the disc cap (28) off the main from (01).
2
1
4
28
- 1 -
6
5
3
4