Advertisement
Quick Links
Advertisement
Summary of Contents for JETStream JEC-2000
- Page 1 HOME MAGNETIC ELLIPTICAL ASSEMBLY INSTRUCTION JEC-2000 Owner's Owner's manual manual...
- Page 2 JEC-2000 ELLIPTICAL ASSEMBLY INSTRUCTION Step 1. Unpack the box and place all the parts on the floor. Step 2. Remove the bolts (04), nuts (06) and washers (05) from the front stabilizer and rear stabilizer (02/03). Attach the front stabilizer and rear stabilizer (02/03) to the main frame (01). Replace the bolts, nuts and washers and tighten using the supplied spanner.
- Page 3 Step 4. Remove the screws (24) and washers (05) from the main post (12). Connect the top tension control cable (13) and bottom tension control cable (14). Then take off the part (14A). Next, connect the top computer cable (19) and the bottom computer cable (21). Slide the main post (12) into the main frame (01) and secure it into place using screws (24) and washers (05) provided.
- Page 4 Step 6. Put both discs (09) on the axle (A1) and tighten the lock-nut (10) into place. Place the lock-nut cap (11) over the lock-nut. (10). - 3 -...
- Page 5 Step 7. Screw the racing bar (15A) into place by tightening the bolts (31), washers (32) and nuts (06). Connect the grip pulse wires (29/29A) together. Insert the handlebar (15R/15L) into the support tube (7R/7L) and fasten the bolts (30) and washers (05). Step 8.
-
Page 6: Exploded View
EXPLODED VIEW 30 5 - 5 -... -
Page 7: Parts List
PARTS LIST Descriptions Main frame Front stabilizer Rear stabilizer M8 Bolt x60mm M8 Arc washer M8 Nut Support tube - R Support tube - L Pedal tube - R Pedal tube - L Disc Lock-nut Lock-nut cap Main post Top tension control cable Bottom tension control cable Clip Handlebar - R...