Table of Contents
Advertisement
When the scan is complete you can see list of available devices in the table. You
can review information like IP address, MAC address, device name, firmware version
and uptime. If you want to restore factory settings on any device on the list, click the
Reset button and enter IMEI. Program will send special packet to all devices, but only the
one with IMEI you have entered will be affected. If the IMEI is correct and the factory
settings have been restored you should see ,,IMEI OK'' in one of cells of last column. This
device will now reset to load new settings and after about 1-2 minutes it will confirm
that whole operation was successful - you should see then that ,,IMEI OK'' will change to
,,done''.
ELTRONIKA sp. z.o.o.
Ul. Warszawska 41 lok.7
05-092 Łomianki
info@eltronika.com
www.eltronika.com
51
- Polska: +48 22 751 97 44
- Česká republika: +420 228 880 487
- Slovensko: +421 904 540 707
Advertisement
Table of Contents
