Uniden DECT 3015 Owner's Manual page 21

Place the mounting slots over
the pins on the wall plate.
Slide the base
down to lock it
into place.
Wall plate
Removing the wall-mount bracket
At the bottom of the base,
pinch the two "nose" of
the wall-mount bracket
as shown, and then
slide the bracket away
from the base.
Note: Mounting the phone directly on the wall
•
Be sure the wall is capable of supporting the weight of the phone, and use
the proper type of anchoring device for the wall material.
•
Insert two #10 screws (minimum length of 35mm, not supplied) into the
wall, 100mm apart.
•
Leave the screw heads 3mm away from the wall to allow room for
mounting the phone.
•
Align the mounting slots over the screws and slide the base down into
place as shown above.
(To AC outlet)
21