Servicing Note - Sony CDP-CE105 Service Manual

QQ
3 7 63 1515 0
How to take out a compact disc when the power is turn OFF.
Rotate the table motor into the
direction of arrow, lef the spindle
motor down and take out the
compact disc.
Compact disc
Spindle motor
TE
L 13942296513
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-up
block. Therefore, when checking the laser diode emission, observe
from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION CHECK
Carry out the "S curve check" in "CD section adjustment" and
check that the S curve waveform is output.
www
.
http://www.xiaoyu163.com
SECTION 1

SERVICING NOTE

Table motor
x ao u163
y
i
— 4 —
http://www.xiaoyu163.com
2 9
8
Compact disc
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9