Fiat Ducato Owner's Handbook Manual page 35

Configuration procedure
To change the service frequency with
the vehicle stationary, turn the ignition
key to MAR and press button E-
fig. 34 for about 10 seconds: the dis-
play will show the wrench symbol and
the message "CFG 1" or "CFG 2" or
"CFG 3" fig. 42. Press briefly button
E to set the required configuration,
then press it again for about 5 seconds
to store the new service frequency;
the display will show again clock and
km or miles.
fig. 42
34
GETTING TO KNOW YOUR VEHICLE
Downloaded from www.Manualslib.com
Service deadline
2.000 km (1.200 mi) before
next service deadline
When scheduled servicing (coupon)
is approaching forecast deadline (2.000
km or 1.200 mi), turn the ignition key
to MAR, and servicing indicator 1-
fig. 43 or 1-fig. 44 followed by the
number of kilometres (or miles) 2-
fig. 43 or the number of days 2-
fig. 44, before vehicle servicing dead-
line will flash for 5 seconds on the ser-
vicing indicator display.
fig. 43
manuals search engine
After these 5 seconds, the odome-
ter will return to normal operation
and display 2 will show either the to-
tal or partial kilometres or total or
partial miles (according to setting).
The information about scheduled
servicing is provided in kilometres (km
or mi) or days, depending on the dead-
line appearing the first. Contact Fiat
Dealership who will provide to per-
form the operations provided by the
scheduled servicing and to reset dis-
playing.
fig. 44