Panasonic CF-53 series Operating Instructions Manual page 15

4 <For MUI OS model>
Select language and OS (32-bit or 64-bit).
NOTE
The message "Reinstall" is displayed, but language and OS (32-bit or 64-bit)
will be prepared by the following steps.
A Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
B Click [Yes, I agree to the provisions above and wish to continue!] and click
[Next].
C Click [Reinstall Windows to the whole Hard Disk to factory default.] and click
[Next].
D At the confirmation message, click [YES].
E Select language and OS (32bit or 64bit) on "Select OS" screen and click
[OK].
The language setting will start by clicking [OK] on the confirmation screen.
You can return to the "Select OS" screen by clicking [Cancel].
The language and OS setting will be completed in about 15 minutes.
F When termination screen is displayed, click [OK] to turn off the computer.
G Turn on the computer.
CAUTION
Carefully choose your language because you cannot change it later. If you set a
wrong language, you need to reinstall Windows.
5 Setup Windows.
A Follow the on-screen instructions.
The computer restarts several times. Do not touch the keyboard or touch
pad, and wait until the drive indicator
After the computer is turned on, the screen remains black or unchanged for
a while, but this is not a malfunction. Wait for a moment until the Windows
setup screen appears.
During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
"Join a wireless network" screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
Wait until the drive indicator
You can change the user name, password, image and Wireless Networks after
setup of Windows.
Do not use the following words and characters for user name: CON, PRN,
AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particu-
lar, if you create a user name (account name) that includes the "@" mark, a
password will be requested at the log-on screen, even if no password has been
set. If you try to log on without entering a password, "The user name or pass-
word is incorrect." may be displayed and you will not be able to log on to Win-
dows ( page 24).
Use standard characters as a computer name: numbers 0 through 9, upper-
case and lowercase letters from A to Z, and the hyphen (-) character.
If the error message "The computer name is not valid" appears, check if char-
acters other than the above are not entered. If the error message still remains
on the display, set the key entry mode to English ("EN") and enter characters.
has turned off.
has turned off.
15