SOYO SY-P4ISR Quick Start Manual page 6

SY-P4ISR Quick Start Guide
Installation
2
2
To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:
Before handling the Motherboard, ground yourself by touching on to an unpainted
l
portion of the system's metal chassis.
Remove the Motherboard from its anti -static packaging. Hold the motherboard by the
l
edges and avoid touching its components.
Check the Motherboard for damage. If any chip appears to be loose, press carefully
l
to seat it firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new SY-P4ISR Motherboard. For detailed information, please
refer to the SY-P4ISR Motherboard User's Manual and Technical Reference online manual
on the CD-ROM that came with your Motherboard.
Gather and prepare all necessary components to complete the installation successfully:
u Socket mPGA478 processor with built-in CPU cooling fan (boxed type)
u SDRAM module (s)
u Computer case with adequate power supply unit
u Monitor
u PS/2 Keyboard
u Pointing Dev ice (PS/2 Mouse)
u Speaker(s) (optional)
u Disk Drives: HDD, CD-ROM, Floppy drive...
u External Peripherals: Printer, Plotter, and Modem (optional)
u Internal Peripherals: Modem and LAN cards (optional)
u VGA Card (AGP, PCI)
6