Caller ID
Caller ID history
Dial a call log entry
1. When in the call log, press qCID or DIRp to browse.
PHONE/
2. Press
Delete entries
/DELETE to delete the shown entry from the caller ID history.
• Press
MUTE
• Follow the steps below to delete all caller ID entries.
1. Press MENU/
2. Use qCID or DIRp to scroll to >CALL LOG, then press
3. Use qCID or DIRp to scroll to >DEL ALL CALLS, then press
/SELECT.
MENU
4. When the screen shows DELETE ALL CALLS? press
clear the caller ID history of all entries, or press
and leave all entries in the caller ID history intact.
Save a call log entry to the directory
1. When in the call log, press qCID or DIRp to browse.
/SELECT to select an entry. The screen displays EDIT NUMBER.
2. Press
MENU
3. Use the dialing keys to edit the number.
• Press
MUTE
• Press and hold
• Press qCID to move the cursor to the left or
• Press and hold
• Copy a number from the redial list by pressing REDIAL/
qCID or DIRp, or by pressing REDIAL/
/SELECT to copy the number.
MENU
/SELECT to move to the name. The screen displays EDIT NAME.
4. Press
MENU
• Use the dial pad keys to add characters (page 28).
• Press
MUTE
• Press and hold
• Press qCID or DIRp to move the cursor to the left and right.
• Press # to insert a space.
5. Press
/SELECT when done and the handset shows SAVED.
MENU
• If the entry is already saved in the directory, the handset shows
ALREADY SAVED. If there is no caller ID information, the handset shows
UNABLE TO SAVE.
NOTES:
1. You may need to change how a caller ID number is dialed if the entry does not appear in the
correct format. Caller ID numbers may appear with an area code that may not be required for
local calls, or without a 1 that may be needed for long distance calls (see page 34).
2. If neither the name nor number is provided, UNABLE TO SAVE appears.
SPEAKER to dial the entry.
or
FLASH
in idle mode to enter the main menu.
SELECT
/DELETE to backspace and erase a digit.
/DELETE to erase the entire entry.
MUTE
to move the cursor to the left or DIRp to the right.
/PAUSE to insert a dialing pause (p appears).
REDIAL
/DELETE to erase characters.
/DELETE to erase all characters.
MUTE
to select a number. Press
PAUSE
35
/SELECT.
MENU
/SELECT to
MENU
/CLEAR to exit
OFF
and then
PAUSE