Advertisement
Views of the Remote Control
Title
Power
Menu
Enter
Direction
buttons
Mute
Numeric
key
Pad
Clear
Repeat
A-B
Repeat
Audio
Sub-
Title
For your reference:
Power: Press to access to or exit from the STANDBY mode.
N/P:
Press to change the color system from PAL, NTSC and AUTO. (PAL and AUTO are
only available when connecting to external TV panel.)
NOTE: The buttons of same descriptions on the main unit/remote control are of same func-
tions. (Please refer to the Function Buttons section in this manual for details).
Display
N/P
Setup
Play/Pause
Stop
Zoom
Next
Previous
F.F
F.B
Search
Step
Slow
Program
Angle
3
Views of the Remote Control
Battery Installations
NOTE:
Refer to the diagram. Open the battery compartment of the remote control.
Insert batteries, and then close the compartment.
To use the remote control, point it at the remote sensor of the unit and operate in the
range of 5 meters and at angle of 60 degrees.
Generally, the batteries last for about one year. Replace the batteries if the remote con-
trol does not work.
Do not spill water on the remote control.
Do not use remote control for other equipments at the same time.
Remove the batteries if the remote control will not be in use for a long period of time.
WARNING:
The battery used in this device may present a fire or chemical burn hazard if mistreated.
Do not recharge, disassemble, incinerate, or heat the batteries about 100 0 C (212 0 F).
Use of another battery may present a risk of fire or explosion. Dispose of used batteries.
Do not dispose of fire.
Keep batteries out of children's reach.
2x AAA 1.5V batteries
4
Advertisement
