Table of Contents
Advertisement
Software Installation
3.
Hardware Installation
The installation of AOpen USB2.0 DVD+RW/+R drive is fast and easy. Please follow
these instructions described below:
3.1.
System Requirements
A PC system with the following features is highly recommended for ensuring a stable
DVD+RW/+R performance.
System
requirements
Interface
Hard disc
Voltage
*CD-RW discs: perhaps are unable to be read in the CD-ROM. If this situation
comes about it is likely that your CD-ROM is not compatible with multi-read please
change to a Multi-read compatible CD-ROM or use your AOpen DVD+RW/+R.
*All Multi-read CD-ROM devices have the following features
(1) CD-ROM is able to read data created by optical heads
(2) CD-ROM will support the UDF specification (Packet Writing)
CPU
We suggest using a Pentium !!! 850MHz
or above (JustLink in use)
Memory
128MB or above
Operating
Windows 98, Windows 2000, XP
systems
Windows Me, NT WorkStation 4.0 Service
Pack 5 or above
USB2.0
Average saving time is 19ms or lower, max data transfer
speed is 33.3MB/sec; disc space 500MB or over
+12V or +5V voltage switches
-- E-6 --
Advertisement
Table of Contents
