Table of Contents
Advertisement
Software Installation
4.
Software Installation
4.1.
Before You Start
Please understand that CD recording is a non-interruptible process. Therefore, a stable
recording environment is a must. If you have a HDD set up only for CD recording
purpose, the recording process shall be smooth.
However, if an extra HDD is not available, you might prefer carrying out the following
steps to optimize your Windows CD recording arrangement:
Close all resident programs that include Anti-Virus, Screen Saver, System
Agent, Power Management, etc. Turn off Auto Insert Notification. Further,
maximizing and minimizing windows are not recommended either. If not, any
operation of these applications will intrude the CD recording process and
damage your disk.
Defrag your HDD before any CD recording. This is particularly important
When you write files to CD from HDD. Defragment of HDD reallocates all the
files so that these relevant files are placed in the nearby clusters. This saves
time and risks when CD/DVD burning software is trying to search for the files
you want to record on CD.
4.2.
Installing Software
For information on installing procedures and how to use the authoring software, please
refer to the manual that came with it. If you want to use another type of authoring
software not bundled with AOpen USB2.0 DVD+RW/+R drive, please refer to each
manual on how to install and operate. Please note that some authoring software or
version of authoring software does not support AOpen USB2.0 DVD+RW/+R drive.
-- E-12 --
Advertisement
Table of Contents
