Specifications - Panasonic AJ-HD3700H Operating Instructions Manual

HD-SD Format converter printed circuit board AJ-UDC3700P
Note concerning the use of spacers
On some S4 printed circuit boards the P7 connector is 7 mm high. If this is the case, a sticker
indicating "7mm" is adhered to the S circuit board (as shown in Fig. 7). If the P7 connector on
the S4 printed circuit board side is 7 mm high, use the 7 mm spacers which are packed together
with the converter board to replace the four existing board spacers.
Fig. 7

Specifications

UP DOWN PCB (VEP83498)
Dimensions:
Weight:
Video input:
Video output:
Frequency characteristics
settings:
Enhanced level:
Video level adjustment ranges:
Screen size setting:
420P SUB PCB (VEP83543)
Dimensions:
Weight:
Video input/output:
Weight and dimensions when shown are approximate.
Specifications are subject to change without notice.
P7 connector
Sticker (P7/7mm)
(This is adhered in this
location when the P7
connector is 7 mm high.)
˝ (W) k ˝ (H) k 6
3 15 / 1 /
16 4
0.286 lbs (130 g)
HD; 1080i (50, 59.94)
1080p (23.98/24)
720p (59.94)
SD; 525i (59.94)
HD; 1080i (50, 59.94/60)
1080p (23.98/24)
720p (59.94/60)
SD; 525i (59.94)
525p (59.94) [4:2:0p]
WIDE/STANDARD/NARROW
0/i1.5/i3/i6 dB
Y output gain;
P output gain;
B
P output gain;
R
Black level;
DOWN; FIT_H/FIT_V/FIT_H&V/14:9/13:9
UP; FIT_H/FIT_V/FIT_H&V
˝ (W) k ˝ (H) k 3
2 3 / 1 /
8 4
0.220 lbs (100 g)
525p (59.94) [4:2:0p]
– 51 –
Replace the existing spacers
with the 7 mm spacers which
are packed together with the
converter board.
5 / ˝ (D)
16
j¶Ti3 dB
j¶Ti3 dB
j¶Ti3 dB
n100 mV
3 / ˝ (D)
8