During A Call; Conference Call - Sharp TM150 User Manual

Accessing the Text Message Menu

During a Call

1
During a call, press C [Options].
The "Options" screen appears.
2
Press a or b to highlight "Text message" and
press B.
3
Press a or b to highlight one of following
options.
Selecting "Create message":
allows you to create a Text message.
Selecting "Inbox," "Sent" or "Drafts":
allows you to access these folders. For more
information on Text messages, refer to "Using the
Message Service" on page 11-69.

Conference Call

This service enables you to call more than 2 people at the
same time. You can talk with 5 participants at most with
this service. To make a conference call, you must have
one active call and one held call.
1
With one active call and one held call, press C
[Options].
The "Options" menu appears.
2
Press a or b to highlight "Conference" and
press B.
3
Press a or b to highlight "Conference all" and
press B to initiate the conference call.
You can talk with all the people on the line.
4
Press F to end the conference call.
The conference call ends.
To add new participants to the conference call
1
During the call, press C [Options] and select
"New call."
2
Enter the phone number you wish to include in
the conference call.
3
Press D.
After the call is connected, continue from the step 1
of "Conference Call."
If you wish to include other participants in the
conference call, perform the same process again.
To put all the participants on hold
1
During the call, press C [Options] and select in
the following order:
"Conference" → "Conference all."
2
Press a or b to highlight "Conference hold all"
and press B.
6-35