Samsung CLP-350N Service Manual page 121

6) JAM 0
• Description
1. Check the Solenoid
by using EDC mode.
2. Check if the pad is loose
due to bad sealing of the
side-pad.
3. Check the surface of the
roller-pickup for foreign matter.
4. If the paper
feeds into the printer rand
Jam 0 occurs, perform EDC to check
feed-sensor of the engine
Samsung Electronics
board.
Adjustment and Troubleshooting
Replace the solenoid.
Replace the side-pad Assembly L or R, if
necessary.
Clean with soft cloth dampened with IPA
(Isopropyl Alcohol) or water.
Replace the Main B'D and/or Sensor.
Service Manual
4-61