Table of Contents
Advertisement
System Lights
What It Means
STATUS
CLEANSENSOR Error
SENSING
WASHING
RINSING
DRYING
CLEAN
START/RESET pad
STATUS
has been pressed
SENSING
WASHING
RINSING
DRYING
CLEAN
STATUS
Control Error
SENSING
WASHING
RINSING
DRYING
CLEAN
PLUS A
BEEPING
SOUND
Control Error
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
PLUS A
BEEPING
SOUND
8
What To Do
If the sensing light does not come on at the beginning of the NORMAL
or POTS PANS cycle, the CLEANSENSOR is not working. Call for service.
The dishwasher will continue to work without the CLEANSENSOR.
NOTE: This light will not stay on the entire cycle.
Allow dishwasher to drain and reset before selecting a new cycle.
Press the START/RESET pad to turn off the beeper. But the
rinsing light will continue to flash. If this continues, call for service.
Press the START/RESET pad to turn off the beeper and the
dishwasher will attempt to reset. Then restart the wash cycle.
If this error continues, call for service.
Flashing Display Lights
Dishwasher
Advertisement
Table of Contents
