Table of Contents
Advertisement
5D. USING RACE MODE 3
To "R-3" mode
Race Mode 3 Features
(1) R-3 timer
R-3timer settings for 3,5,10,15 minutes are possible by pulling out the (M)
button to the 1st stop position. (See following section)
Time remaining during timer countdown is displayed on the graphic display
panel.
The timer countdown hand (second hand) moves counterclockwise subtracting
time from the timer setting.
(2) Second hand reset
(3) Fly-back - timer restart feature
(4) Time-Up confirmation beep
*(2), (3) are the same as in Race mode 1. (4) is the same as in Race mode 1,
2, with an additional warning beep 10-minutes before time up. See sections
Setting the time and Using Race Mode 1.
Setting the R-3 Timer
Setting Procedures
•
Timer settings for 3, 5, 1 0, I 5
minutes are possible on the circular
graphic display minute scale.
•
After selecting the timer setting push
the (M) button in to the normal
position. The timer setting will now
be displayed on the graphic display
panel as in the R-1 andR-2 timer
modes.
•
Time conversion from the circular
graphic display minute scale to the
graphic display panel.
Circular graphic display minute scale
3 min.
5 min.
10 min.
15 min.
Return to Table of Contents
Race mode 3
R-3 Timer
Second hand reset function (2)
Fly-back feature
Time-Up confirmation beep
Return to Table of Contents
Graphic display panel
3 red, 2 white
5 red
5 blue
5 white
(1)
(3)
(4)
Hide quick links:
Advertisement
Table of Contents
