All-Reset Function - Citizen 6840 Setting Instructions Manual

5H. MONITORING IN THE NORMAL TIME MODE
Alarm time set monitor
Press the (B) button while in the normal time mode to monitor the alarm
setting.
5I. ALL RESET FUNCTION
The all reset function is used after battery changes or when watch movement is
less than normal.
(1) The all reset function can be activated in any mode.
Pull the (g) button out to the 1
(2) Push and hold down the (A), (B), (C) buttons simultaneously for more than 2
seconds.
Release all three buttons and a confirmation beep will sound.
Push the (M) button in to the normal position after the above procedures are
complete and set the watch to zero in the Zero position confirmation mode.
(See Zero position setting section)
Return to Table of Contents
ST
step position.
Return to Table of Contents
Press the (B) or (C)
button to return to
the normal time mode
from the alarm
monitoring mode.