Citizen 6840 Setting Instructions Manual page 18

Hide thumbs Also See for 6840:
Table of Contents

Advertisement

The start/finish line is usually set at right angles to the direction of the
wind, but because the wind is always shifting direction, it is a rare occasion
when a true 90' angle is met.
In this case, line up the white triangle at the 12 o'clock position on the watch
with the direction from which the wind is blowing. Sail from one end of the start
finish line to the other, using the white lines marked (at 3 or 9 o'clock) on the
watch to site your destination. If the course steered falls on the plus (+) side
of the white line, you are on a favorable heading to start the race when you
cross the start finish line.
If the course steered falls to the minus (-) side of the white line on the watch,
you know it is favorable to cross the start/finish line on a heading from the
opposite direction.
Use any one or a combination of the three methods described above to help you
maneuver your boat into and maintain the position you feel is the most
advantageous during a race.
Return to Table of Contents
Using the rotating bezel (2)
Most present day yachts are capable of
sailing 45o to the wind.
To be in a position of being able to read
the wind shift after the start of a race,
make several runs before the race matching
your course as close as possible to the red
(or green) bars on the left (or right)
upper portion of the watch dial.
Using the rotating bezel (3)
By using the rotating bezel in the
following way, you can determine the angle
between the start/finish line and the
direction from which the wind is blowing.
Return to Table of Contents

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents