Air Hogs Vectron Wave Instruction Manual

INSTRUCTION GUIDE
Contents:
1 Air Hogs ® Vectron ® Wave
1 Catching Stick
1 Charger
1 Instruction Guide

BATTERY REMOVAL AND INSTALLATION

1. Requires 6 x 1.5-V AA alkaline batteries.
2. Open the battery door with a screwdriver.
3. If used batteries are present, remove
these batteries from the unit by pulling
up on one end of each battery.
4. Install new batteries as shown in the
polarity diagram (+/-) inside the battery
compartment.
5. Replace battery door securely.
6. Check your local laws and regulations for
correct recycling and/or battery disposal.
CHG/OFF/ON
Charge
Switch
Socket
The Air Hogs ® Vectron
time flyers. All you need is an open space and
6 x 1.5-V AA alkaline batteries (not included) to
take flight. Some assembly required.
ADULT SUPERVISION RECOMMENDED.
PLEASE READ THESE INSTRUCTIONS
BEFORE FLYING
®
Vectron ® Wave
Battery Door
6 x
1.5-V AA
Alkaline
Batteries
Battery
Compartment
GETTING TO KNOW YOUR VECTRON
IR Sensor
Power LED
® Wave is perfect for first-
Catching Stick
® WAVE
IR LED IR LED
OFF
Switch
1
Problems flying?
Do not return your
Air Hogs ® to the store.
Call the Air Hogs ®
training center at
1 800 622 8339
Charger
Attach the catching
stick to the Vectron
Wave by pushing the
bottom of the stick into
the hole on the top of
the Vectron ® Wave.
Use catching stick to
toss or catch the
Vectron™ Wave.
Stop Button
Power LED
Indicator
ON/CHG
flight
®