Air Hogs Vectron Wave Instruction Manual

Contents:
1 Air Hogs ® Vectron ® Wave
2 Catching Sticks
1 Charger
1 Instruction Guide
WARNING:
CHOKING HAZARD
– Small parts.
Not for Children under 3 years.

BATTERY REMOVAL AND INSTALLATION

1. Open the battery door with a screwdriver.
2. If used batteries are present, remove
these batteries from the unit by pulling
up on one end of each battery.
3. Install new batteries as shown in the
polarity diagram (+/-) inside the battery
compartment.
4. Replace battery door securely.
5. Check your local laws and regulations for
correct recycling and/or battery disposal.
CHG/OFF/ON
Charge
Switch
Socket
The Air Hogs ® Vectron
an open space and 6 x 1.5-V AA alkaline batteries (not included) to take
flight. Some assembly required. ADULT SUPERVISION RECOMMENDED.
PLEASE READ THESE INSTRUCTIONS BEFORE FLYING
Vectron ® Wave
Battery
Compartment
Door
6 x
1.5-V AA
Alkaline
Batteries
Battery
Compartment
GETTING TO KNOW YOUR VECTRON
IR Sensor
Power LED
®
INSTRUCTION
GUIDE
® Wave is perfect for first-time flyers. All you need is
Catching Sticks
® WAVE
IR LED IR LED
OFF/ON/CHG
Switch
1
Charger
NOTE: Attach the
catching stick to the
Vectron ® Wave by
pushing the bottom of
the stick into the hole
on the top of the
Vectron ® Wave.
Use catching stick to
toss or catch the
Vectron ® Wave.
Stop Button
Power LED
Indicator