PC connection
Computer does not
•
Check the operating environment.
recognize camera when
•
If your computer has multiple USB terminals, please try connecting
USB connection cable is
the camera to a different USB terminal.
connected.
•
Switch the camera's power off and back on again, and reconnect
the USB connection cable.
An error message appears
•
To disconnect the USB connection cable safely, double-click the
on the computer when the
icon in the task tray, and follow the instructions on the screen.
USB connection cable is
disconnected.
Other
The remote control does
•
The battery in the remote control may have run out.
not work.
If the remote control fails to work even if it is operated close to the
remote control sensor of the camera-recorder, it means that the
battery has run out. Replace it with new one.
•
Is the IR REMOTE item on the setting menu OTHER FUNCTIONS
screen set to OFF?
There is a rattling sound
•
This is the sound of the lens moving. This is not a fault. No sound
when the camera-recorder
should be heard when the camera's power is switched on.
is tilted back and forth.
•
This initialization operation is performed when the camera starts up.
It occurs due to the construction of the camera and is not indicative
of any trouble.
The SD Memory Card
•
The data on the card could be corrupted. Data can be corrupted by
screen appears strange.
static electricity and electromagnetic waves. Please always save
important data to a computer or other storage media.
The SD Memory Card
•
There could be a fault with the camera or with the SD Memory
cannot be used even after
Card. Please consult the place of purchase. Always use only SD
formatting.
Memory Cards of 512 MB - 32 GB with this camera.
The camera does not
•
Was the inserted SD Memory Card originally formatted with a
recognize the SD Memory
computer? Always use this camera to format SD Memory Cards.
Card even though it is
Please be aware that, when an SD Memory Card is formatted, all
inserted correctly.
data recorded on the card will be erased and will not be restorable.
The SD Memory Card is not
•
Please check that the device is compatible with the capacity or type
recognized when inserted
(SD Memory Card/SDHC Memory Card) of the SD Memory Card
into other devices.
that you are using.
For details, please consult the device's own operating instructions.
P86
—
P27
—
—
—
—
P36
P14
115