Changing Channels - Samsung HL-R4667W Owner's Instructions Manual

Changing Channels

Using the Channel Buttons
Press the CH/PAGE
When you press the CH/PAGE
You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.
Press the number buttons to go directly to a channel. For example, to select channel 27, press
"2," then "7." The TV will change channels when you press the second number.
Using the "-" Button
The "-" button is used to select stations that broadcast both a digital and analog signal.
NOTE
• HD indicates the TV is
receiving a Digital High
Definition signal.
SD indicates the TV is
receiving a Analog
standard definition
signal.
or CH/PAGE button to change channels.
or CH/PAGE
For example, for channel 7-1
(digital), press "7", then "-",
then "1".
For channel 7-2 (analog), press
"7", then "-", then "2".
Using the Previous Channel
Press the PRE-CH button.
The TV changes to the last channel you were watching.
button, the TV changes channels in sequence.
DTV Air
7-1
English
Picture Mode
Sound Mode
MTS
Caption
V-Chip
12:00 am
Air 7-2
Mono
Picture Mode
Sound Mode
MTS
Caption
V-Chip
12:00 am
Standard
Standard
English
On
Off
Standard
Standard
Stereo
On
Off
English - 35