Table of Contents
Advertisement
If you want to reset this feature...
Setup
Plug & Play
Language
Time
V-Chip
Caption
Menu Transparency: Medium
Blue Screen
Function Help
Move
Enter
Menu language, Channels
and Time will be set .
Start
Changing Channels
Using the Channel Buttons
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Using the "-" Button
The "-" button is used to select channels that broadcast a digital signal.
Using the PRE-CH Button to select the Previous Channel
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Setup", then press the ENTER button.
√
√
: English
√
√
√
√
√
: Off
√
: On
Return
2. Press the ENTER button to select "Plug & Play".
For further details on setting up options, refer to the pages 13~14.
➢
Plug & Play can only be accessed in the TV mode.
1. Press the CH
➢
When you press the
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either erased
or not memorized. See page 17 to memorize channels.
1. Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7."
The TV will change channels when you press the second number.
1. For example, for channel 7 (digital), press "7", then "-", then "1".
HD indicates the TV is receiving a digital High Definition signal. SD indicates the
TV is receiving an analog Standard Definition signal.
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
➢
To quickly switch between two channels that are far apart, tune to one channel, then
use the number button to select the second channel. Then use the
quickly alternate between them.
or CH
button to change channels.
CH
CH
or
English-15
button, the TV changes channels in sequence.
PRE-CH
button to
Advertisement
Table of Contents
