1. Manuals
  2. Brands
  3. Wyre Storm Manuals
  4. Matrix Switcher
  5. MX-1616-PP-POH
  6. Instruction manual

Wyre Storm MX-1616-PP-POH Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MX-1616-PP-POH
Fixed Pro Plus chassis featuring PoH
HDBaseT out, mirrored HDMI out,
HDMI in, IR input transmission card
WyreStorm Pro Plus PoH HDBaseT Solutions
Please read these instructions carefully before installing to avoid complications later.
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343
MX1616-PP-POH / Custom Manual.indd 1
MX-1616-PP-POH-CUSTOM
Modular Pro Plus chassis with selection of customisable
analogue and digital PoH transmission cards.
Instruction Manual
Thank you for choosing this WyreStorm product.
1
15/05/2014 16:08

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX-1616-PP-POH and is the answer not in the manual?

Questions and answers

Related Manuals for Wyre Storm MX-1616-PP-POH

Summary of Contents for Wyre Storm MX-1616-PP-POH

  • Page 1 MX-1616-PP-POH MX-1616-PP-POH-CUSTOM Fixed Pro Plus chassis featuring PoH Modular Pro Plus chassis with selection of customisable HDBaseT out, mirrored HDMI out, analogue and digital PoH transmission cards. HDMI in, IR input transmission card WyreStorm Pro Plus PoH HDBaseT Solutions Instruction Manual Thank you for choosing this WyreStorm product.

  • Page 2: Table Of Contents

    Front Panel Description Models in the MX-PP-POH range offer an HDBaseT Pro Plus matrix solution with PoH support for power passed along a i. Rear Panel Description - MX-1616-PP-POH single Cat5e/6/7 cable along with transmissions and control ii. Rear Panel Description -MX-1616-PP-POH-CUSTOM commands to enable receivers to operate without the need for local mains power at display zones.

  • Page 3: Features

    Safety Precautions • Fully 3D compatible – Frame sequential 3D (Blu-ray) and • (MX-1616-PP-POH) - factory configured with 16 interlaced stereoscopic 3D (satellite broadcasts etc.) standard transmission cards: HDBaseT PoH out, • Supports all high definition resolutions up to and including WARNING 1080p and standard video formats.

  • Page 4: Package Contents

    • Flash USB stick containing PC control software and digital copy • 6 / 8 x IR TX Emitters (small sensor for Input source) • 1 x MX-1616-PP-POH main unit - 16 input 16 output • 1 x Printed instruction manual...

  • Page 5: Front Panel Description

    LED input/output select screen Output select buttons (left/right) IR receive window Confirm selection button Input select buttons (UP/DOWN) Rack handles Rear Panel Description - MX-1616-PP-POH RS485 port HDBaseT PoH output ports EDID DIP Switch (RJ45 Cat5e/6) LAN port EDID DIP default diagram...

  • Page 6: Rear Panel Description -Mx-1616-Pp-Poh-Custom

    7ii. Rear Panel Description - MX-1616-PP-POH-CUSTOM Card Options HDBaseT out, Mirrored HDMI out, HDMI in, IR in - “Default” card TX-POH-010 as standard on all non-CUSTOM MX-PP-POH matrix models. Offers 70m/230ft HDBaseT transmission including Video, Audio, Control & Power, combined with a duplicate HDMI output to allow simultaneous connection of a second local “mirrored”...
  • Page 7 TX-POH-070 HDBaseT out, VGA + Stereo audio in, IR in - Enables compatibility with legacy analogue computing equipment and embedding stereo audio into 1920x1080 VGA or 1920x1080p YUV signals. Also contains 70m/230ft HDBaseT transmission including Video, Audio, Control & Power. IR in allows control signals to be sent to the sink device. TX-POH-080 HDMI In - Perfect option should a system require more source devices...

  • Page 8: Typical Application - Tx-Poh-010 Transmission Card

    Typical Application - TX-POH-010 Transmission Card PERSONAL AUDIO DEVICE 25w d-class amp 25w d-class amp 25w d-class amp Enhanced 2.1 Audio & HD Enhanced 2.1 Audio & HD Enhanced 2.1 Audio & HD rx-70-poh HD Audio Video PERSONAL AUDIO DEVICE rx-70-poh rx-70-poh HD Audio Video...
  • Page 9 8ii. Typical Application - All Cards PERSONAL AUDIO DEVICE 25w d-class amp 25w d-class amp 25w d-class amp Enhanced 2.1 Audio & HD Enhanced 2.1 Audio & HD Enhanced 2.1 Audio & HD PERSONAL AUDIO DEVICE PERSONAL AUDIO DEVICE 25w d-class amp 25w d-class amp 25w d-class amp Enhanced 2.1 Audio &...
  • Page 10 using Cat5e as standard, we suggest using Cat6 as Connection the preferred cable due to its improved transmission capabilities. Connect source devices (such as: Blu-Ray, Ensure both RJ45 connectors are pushed securely into computer, games console, satellite/cable, music each port and supported by the connector strain relief streaming device, CCTV etc.) to the relevant input ports clip to prevent loosening.

  • Page 11: Basic Operation

    Attention All receivers must be connected to the matrix via UTP cable before matrix is powered on. As power forms part of the HDBaseT carrier signal, if a transmission link can not be established between matrix and display receiver, it is unlikely the receiver will be able to draw power.

  • Page 12: Basic Remote Control

    The default system setting is 0x00 to control one matrix, but The default system setting is 0x00 to control one matrix, but pressing the SYSTEM CODE button on the handset THREE pressing the SYSTEM CODE button on the handset THREE TIMES rapidly activates the alternative Matrix SYSTEM CODE TIMES rapidly activates the alternative Matrix SYSTEM CODE 0x4e, allowing independent control of a second unit.

  • Page 13: Displays From Multiple Locations

    cable. IR signal of that RJ45 port selects the relevant IR TX port to so when an OUTPUT selects a certain INPUT, the CALL-BACK so when an OUTPUT selects a certain INPUT, the CALL-BACK HDBT OUT 1 HDBT OUT 5 so when an OUTPUT selects a certain INPUT, the CALL-BACK so when an OUTPUT selects a certain INPUT, the CALL-BACK OUTPUT the control signal.

  • Page 14: Advanced Operation

    As with the IR TX, the IR RX ports are allocated to their respective UTP OUTPUT ports (Output1- RX1, Output2-RX2) with the IR signal converted to As with the IR TX, the IR RX ports are allocated to their HDBaseT and carried along the single Cat5e/6/7 respective UTP OUTPUT ports (Output1-RX1, Output2 cable.
  • Page 15 to 7 cascaded receiver devices (such as RX-70-IR-POH Advanced Operation display receiver or AMP-001-010 digital audio amplifier/ receiver) to be connected to each output of the matrix, with serial control commands sent centrally through the Controlling the MX-PP-POH using RS232 and RS232 port of the matrix to operate any display device COMCTL PC Software within the 16 separate control zones managed by the...

  • Page 16: Routing Serial Commands From The Mx-Pp-Poh

    Control System 14. Routing Serial Commands from the MX-PP-POH If using serial control with MX-PP-POH matrices to control compatible display receiver devices, routed serial commands to the receiver device (RX-70-POH or AMP-001-010) via the matrix should be sent in the following command string: 05 55 55 57 xx xx xx xx xx...

  • Page 17: Quicksync Setting

    15. QuickSync Setting WyreStorm QuickSync is a new matrix feature that significantly enhances end-user experience by dramatically reducing the amount of time source devices need to communicate HDCP encryption data between the matrix and output devices. Typically, when a matrix device distributes multiple sources to multiple zones, each sink device (TV, digital projector, etc.) requires a repeated process of HDCP data negotiation between each source connected to the matrix every time a source is switched;...
  • Page 18 COM CTL After fully connecting all inputs and outputs to the matrix Send Message Window - Input serial commands and installing the software, on opening the program the for the matrix in the Send Message Window - such as control window will display information from the matrix, instructions for outputs or to enter update mode –...
  • Page 19 Control Command Format combinations of displays and sources within the matrix.You Should users wish to write their own command software can save your selections by allocating your choices to Save for controlling the matrix remotely, see information on data buttons 1-3 and recall previously saved output/ input RXD Receive serial data from PC format and baud rate settings:...
  • Page 20 This setting is locked by default. UTP LONG CABLE MODE – As with HDMI Long Cable Mode, if signal transmission quality is affected by a Cat5e/6/7 cable run reaching the maximum distance capacity (70m / 230ft using RX-1UTP-IR-70), switching Long Cable Mode to ON will instruct the matrix to attempt to improve transmission over the UTP in an effort to improve signal quality.
  • Page 21 system. The resulting data will appear in the central section. ansmission if section where output and input code can be edited if For example: if ompatible devices. necessary (for example if using third party control systems will feedback “s 2- Use your cursor to click into the box containing the IR data NPUT/OUTPUT you wish to change.
  • Page 22 If the control command is sent successfully, the current output he Matrix via state selected will feedback to show the in-put port selected. The code. Third return status format is as follows: ‘\r’ ‘\n’ it is If the control command is sent successfully, the current output he Matrix via This translates as: Pressing the EDID SET button in the COM CTL...

  • Page 23: Edid Management - About Edid

    TELNET Control to confirm IP settings For TELNET Control, the matrix IP address is as follows: ATTENTION This ‘Assign IP’ process differs from the COM CTL ‘IP Set’ function. ‘Set IP’ in COMCTL saves/reads the IP address in flash and sets it as static IP. ‘Assign IP’ is only used when the system fails to obtain an IP address automatically and is NOT saved in flash.

  • Page 24: Before Edid Adjustments

    1080p 5.1 ✳ Before EDID The matrix will use 3D compatible Adjustments 1080p-5.1 EDID when the DIP switch is 1 2 3 4 in this setting. 1080p 7.1 ✳ Communication between sink, matrix and source devices should be automatically negotiated with the EDID DIP The matrix will use 3D compatible switch set to the default Normal Output (OFF) position.

  • Page 25: Troubleshooting

    3) Distance – Is the cable too long for the signal to be Troubleshooting transmitted effectively? The HDBaseT classification used within the transmitters and receivers allow transmission of 1080p up to 70m/230ft so make sure the cable distance Generally, the majority of HD distribution installation matches the project requirements and is well within the issues are either caused by minor connection maximum transmission distance of the signal.
  • Page 26 10) HDMI lead condition and quality – HDMI cables channel audio and EDID copy from the AVR may be and connectors are delicate and can be damaged much required or use an embedded EDID in the AMP or Matrix. easier than component or coax cable. Furthermore, lead quality varies dramatically, particularly in lower price NOTE If problems are experienced when an AV...
  • Page 27 the camera at the remote control when pressing a button. Can I use a single Cat 5e/Cat 6 cable? The remote transmitter can be seen flashing to indicate a HDBaseT technology only requires a single cable; all signal being sent. Replace batteries if flashing is not seen features associated with twin cable are supported with on the digital camera screen.

  • Page 28: Maintenance

    environmentally friendly. I can get 1080i but not 1080p at a TV location Firstly ensure that both the source is capable of outputting 1080p and that the TV is Full HD 1080p screen. If this Are WyreStorm products compatible with HDMI 1.4? HDMI 1.4 refers to a list of ‘features’...
  • Page 29 When shipping the unit, carefully pack and send it 25ii. Warranty Limits and prepaid, with adequate insurance and preferably in the original packaging. Exclusions Please include a document or letter detailing the reason for return and include a daytime telephone number and/or email address where you can be contacted.
  • Page 30 26i. Installation Reference Log - Input Reference Log WyreStorm Matrix OUTPUT installation reference log output Output Output Location Display Details Display Resulution & Audio Cable number on Settings Number Matrix Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 MX1616-PP-POH / Custom Manual.indd 30 15/05/2014 16:09...
  • Page 31 26i. Installation Reference Log - Output Reference Log WyreStorm Matrix OUTPUT installation reference log output Output Output Location Display Details Display Resulution & Audio Cable number on Settings Number Matrix Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 MX1616-PP-POH / Custom Manual.indd 31 15/05/2014 16:09...
  • Page 32 MX1616-PP-POH / Custom Manual.indd 32 15/05/2014 16:09...
  • Page 33 MX1616-PP-POH / Custom Manual.indd 33 15/05/2014 16:09...
  • Page 34 www.wyrestorm.com WyreStorm Offices US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 1 901 384 3575 Fax: + 1 901 384 3574 Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 WyreStorm Technical Support US: + 1 866 677 0053 UK: + 44 (0) 1793 230 343...

This manual is also suitable for:

Mx-1616-pp-poh-custom

Table of Contents