Dhcp Server Settings - Verizon FiOS-G1100 User Manual

ROUTING
To view a summary of the services provided by the DHCP server:
Select IP Address Distribution in the Advanced page.
1.

DHCP SERVER SETTINGS

You can edit the DHCP server settings for a device.
To edit the settings:
On the IP Address Distribution page, click the Edit icon in
1.
the Action column. The DHCP Settings page opens with the
device information displayed.
To enable the DHCP server, select DHCP Server in the IP
2.
Address Distribution field.
Once enabled, the DHCP server provides automatic IP
assignments (IP leases) based on the preset IP range defined
below.
To configure the DHCP server complete the following fields:
3.
Start IP Address – enter the first IP address that your
•
Gateway will automatically begin assigning IP addresses
from. Since your Gateway's default IP address is
192.168.1.1, the default start IP address should be
192.162.1.2.
End IP Address – enter the last IP address that your
•
Gateway will automatically stop the IP address allocation.
The maximum end IP address range that can be entered is
192.168.1.254.
WINS Server – determines the IP address associated with
•
a network device.
Lease Time in Minutes – assigns the amount of time in
•
minutes that each device is assigned an IP address by the
DHCP server when it connects to the network.
When the lease expires, the server determines if the
computer has disconnected from the network. If it has,
the server may reassign this IP address to a newly-
connected computer.
verizon.com/fios
08 / CONFIGURING
ADVANCED SETTINGS
154
©
| 2014 Verizon. All Rights Reserved.