(1) 12V DC Car Battery Supply Adapter (1) Registration Card * Bluetooth® available in M6BR8 models only The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Ing. and any use of such marks by Elite Acoustics Designs, Inc is under license NOTE: Due to continuous development and improvements of our products, features and specifications are subject to change without notice.
Page 2
QUICK START Make sure the SPEAKER VOLUME [3] control is down before your turn the POWER [22] on. Connect the output of your microphone to the MIC IN [13]. Or you can connect a ¼” line input from an instrument [12]. Connect an additional mono or stereo [11]. Connect the DC power cord to the back panel [20].
Page 3
Tip (Send) Ring (Return) Sleeve (GND) w/ Phantom Power (+48V) TO FULLY CHARGE SPEAKER SYSTEM Put power switch in the “OFF” position Plug in power adaptor into the DC input jack Blue “Charge” LED will turn on, indicating the speaker is charging When the speaker is fully charged, the blue “Charge”...
Page 4
EAD/Sunburst Gear reserves the right to update any unit returned for repair. EAD/Sunburst Gear reserves the right to change or improve the design of the product at any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration, or attempted repair by unauthorized personnel and is limited to failures arising during normal use that are due to defects in material or workmanship in the product.
Need help?
Do you have a question about the M6BR8 and is the answer not in the manual?
Questions and answers