(1) 12V DC Car Battery Supply Adapter (1) Registration Card *Rechargeable battery available in M1BR3 and M1R3 only ** Bluetooth® available in M1BR3 models only The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Ing. and any use of such marks...
Page 2
Connect the DC power cord to the back panel [14]. Turn on the POWER [14] switch **For M1BR3 only, Connect device to Bluetooth Turn on your signal(s) and adjust the volume on the source signal for normal operation. Note if you are using an iPhone or iPad via Bluetooth, set the volume on your device about halfway.
Page 3
TO FULLY CHARGE SPEAKER SYSTEM Put power switch in the “OFF” position Plug in power adaptor into the DC input jack Blue “Charge” LED will turn on, indicating the speaker is charging When the speaker is fully charged, the blue “Charge” LED will turn off FOR MAXIMUM BATTERY LIFE •...
Page 4
EAD/Sunburst Gear reserves the right to update any unit returned for repair. EAD/Sunburst Gear reserves the right to change or improve the design of the product at any time without prior notice. This warranty does not cover claims for damage due to abuse, neglect, alteration, or attempted repair by unauthorized personnel and is limited to failures arising during normal use that are due to defects in material or workmanship in the product.
Need help?
Do you have a question about the M1BR3 and is the answer not in the manual?
Questions and answers