CMO Service Operations
Training and Vendor Development
Multimedia Creation & Support
19. ... and then flex it slightly to release one end. It can now
be removed.
21. Hold the Engine Module in position and open the Micro
Coax Cable Assembly connector with the SS-93.
23. Use the SRT-6 to peel up the Domesheet at one corner.
Service Manual 6125 RM-178 /6136 RM-106/-199
Page
27
(42)
CONFIDENTIAL
20. Raise the Engine Module slightly at the Pop-Port Connector
end and then open it bookwise to a perpendicular position.
22. Now remove the Engine Module and place it on the C-Cover
Assembly.
24. Now peel the Domesheet from the Engine Module and check
the surface for adhesive residues.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
15.Dec.2006