Remote Control Functions; 3 Buttons Remote; Maintenance; Heater - Charmglow 18EF010GAA Homeowner's Operating Instructions

The insert Main Power Switch must be switched
ON in order for the Remote Control to function.
The Power button will put the insert in a standby
mode. This will turn off all functions at once but
will hold the settings in memory. By pressing the
button again the unit will turn on at the same settings.
Each time this button is pressed, the intensity of the
flame decreases. There are five brightness levels you
can cycle through including the
This button will turn the power to the heater and
blower on and off. As an important safety feature, the
heating element is designed with a delayed activation
sequence. Therefore, when the heater is turned ON it
will take several seconds for the unit to begin blowing
hot air. Subsequently, the fan blower will continue to
run for several seconds after the heater is switched OFF.
The rotary switch (THERMOSTAT) controls the
thermostat feature to help regulate your room's
temperature accordingly.
setting.
POWER
FLAME

HEATER

ELECTRIC FIREPLACE REMOTE