Advertisement
Through a laptop PC with WIFI
b.
Install the IP Camera software in PC.
Select the IPCAM_XXXXXX connection in the
networking bar of PC; the password is null.
Run the IP Camera software.
Double-click the IP address in the following
prompt box and input the user name "admin"
and leave password blank.
Select "RC Plug-in Mode" in the
prompt box below.
Select "Device Management" in the
prompt box below.
First select "wireless settings" in the following
prompt box and select "search" on the right. Then
the available WIFI hot spot in the neighborhood
will display. Select the user's own router and in the
shared password box input its WIFI password.
Click "set" and con rm. IPCAM will count down
and restart. After restarting, the client software
can be connected with IPCAM to see the screen
after reconnecting to normal wireless network.
IP Camera
4
c.
Through a mobile telephone
(iOS or Android)
Install the LSCAM APP in the phone.
Select the IPCAM_XXXXXX connection in the
WIFI networking bar of the phone; the password
is null.
Run the APP.
Enter into "Click here to add camera.
Select and enter into "Wi Wizard add".
Wifi
Advertisement
