Advertisement
Configuration of IP Camera
When this product (IP Camera) is used for the
rst time, it needs to be connected wirelessly
to a router with internet access via one of the
three methods below.
a.
WPS setup
Press the WPS button in the panel of IPCAM for
at least 5 seconds. The blue indicator will icker
rapidly after entering into the WPS mode. Then
press the WPS button in the router which connects
to IPCAM (the operation of router entering into WPS
mode should refer to the manual of router).
The camera is now setup to the router.
Using mobile phone APP
Enable phone network function, install and
run "LSCAM" software.
Click "Click here to add camera".
Different options are listed.
Scan QR code (This is the easiest method
to setup)
Run"Scan QR code".
Scan QR code (supplied with each unit)
2
Scan QR code
Scan QR code
Advertisement
