Page 1
QUICK SETUP GUIDE SLFLEDWIFI Thank you for Purchasing the SLFLEDWIFI This LED security oodlight with built in HD CCTV camera and WIFI can easily be con gured via 3 different methods a. With the WPS button present on the unit and most new WIFI routers.
Page 2
Different options are listed. Configuration of IP Camera When this product (IP Camera) is used for the rst time, it needs to be connected wirelessly to a router with internet access via one of the three methods below. WPS setup Press the WPS button in the panel of IPCAM for at least 5 seconds.
Page 3
After entering “ user” and “Password”, After entering “ user” and “Password”, click“save”. As default username is admin, click“save”. As default username is admin, password is null. password is null. LCAM-XXXXXX-XXXX LCAM-XXXXXX-XXXX Setup is complete. Setup is complete. LAN search Manual add Run “LAN search”.
Page 4
Through a laptop PC with WIFI Install the IP Camera software in PC. Select the IPCAM_XXXXXX connection in the networking bar of PC; the password is null. Run the IP Camera software. IP Camera Double-click the IP address in the following prompt box and input the user name “admin”...
Page 5
Follow the prompts and select “Next”. Input the WIFI password of the router and select “Next”. The password should be null, tap on password eld and select “Next”. Input the password of the camera default is blank and click “Save”. IPCAM will restart. After restarting, the software can be connected with IPCAM to see the screen.(you will need to reconnect to normal WIFI network)