Fitting & Removing The Solo & Duolo Seat; Folding & Unfolding - abc Aspire Manual

2. fIttIng anD remoVIng the toDDLer seat
1) Position the hood of the Aspire buggy into the out stretched position.
2) Attach the toddler seat accessory to the adaptor bar by sliding the base of the toddler seat
on to the adaptor bar prongs (2.a). Depressing the spring lock buttons on the adaptor bar
(2.B) to allow the toddler seat to sit at the base of the adaptor bar prongs.
3) Check that the spring lock buttons on the adaptor bar have sprung back out into position
once the toddler seat is attached (2.c).
4) To Remove the toddler seat from the adaptor bar for storage or folding, push in the spring
lock buttons to remove the toddler seat off the adaptor bar.
5) The adaptor bar accessory does not need to be removed from the buggy for folding
or storage.
3. foLDIng anD unfoLDIng
Remove the toddler seat accessory as per the reverse of the steps above to enable the folding
of the buggy.
Place the bumper bar of the toddler seat in the upright position to allow for the toddler seat to
fold flat for storage (3.a).
Refer to Aspire buggy instructions for folding the buggy frame/chassis.
8
2.B
2.A
2.C
3.A