Adaptor Bar Attachment - abc Aspire Manual

1. aDaptor Bar attachment

To attach the Adaptor bar to the handle bar you must fi rst remove the handle bar from the
buggy frame/chassis.
1) Apply the brake (1.a).
2) Unclip the top press-studs on the canopy and the top of buggy sling/seat (1.B).
3) Loosen the black tri-knobs at the base of the handle bar (1.c), pull the handle out to the
fully extended position. Two silver spring button knibs will spring out into position on the
buggy frame/chassis (1.D). Depress the spring buttons on the side of the frame/chassis
and pull the handle bar away from the buggy frame/chassis to remove the handle bar
completely (1.e).
6
1.A
1.C
1.B
1.D
1.E