abc Aspire Manual page 7

1.F
1.G
1.I
Installing the adaptor bar onto the handle bar
1) With the Adaptor bar prongs facing upwards towards you, enter the handle bar into the
tube openings of the Adaptor Bar (1.f).
2) Slide the handle through the Adaptor bar tube openings (note: you will have to depress the
safety buttons on the handle bar to complete the process) (1.g).
3) With the Adaptor Bar now installed on to the handle bar, return the handle & adaptor bar
combination to the buggy (1.h).
1.G
4) Ensure the safety buttons have clicked into the safety holes of the buggy frame (which is
the fully extended position of the handle) (1.I).
5) Tighten the black tri-knobs at the base of the handle bar to tighten the handle bar
into place (1.J).
Important: Slide the adaptor bar down the handle so that the adaptor bar tube brackets
are flush with the TOP of the buggy chassis/frame.
1.H
1.J
7