Sony DAV-DZ200 Operating Instructions Manual page 74

Using a digital satellite
receiver or other components
with a high audio output level
Connect the satellite receiver to the VIDEO/
SAT jacks on the rear panel. You can also
connect the components with a high audio
output level (including 2V r.m.s components,
such as MD, etc.) to the VIDEO/SAT jacks, and
perform the following to prevent distortion
occurring.
1
Press FUNCTION repeatedly until
"VIDEO" appears in the front panel
display.
2
Press AMP MENU.
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press ENTER or c.
4
Press X/x to select "ATT ON" in the
front panel display.
The output level is changed.
When you select "ATT OFF" and press x,
this operation will be canceled.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
The function name in the front panel
display changes to "SAT."
Tip
• To return to the VIDEO function, select "ATT OFF"
at Step 4.
Changing the output level of
the sound from the AUDIO IN
jack on the front panel
Depending on the component, distortion occurs
because of the input level when listening to the
component that is connected to the AUDIO IN
jack on the front panel.
To prevent this, you can change the output level
of the sound from the AUDIO IN jack on the
front panel.
1
Press AMP MENU.
2
Press X/x repeatedly until "AUDIO
ATT" appears in the front panel
display, then press ENTER or c.
74
GB
3
Press X/x repeatedly until "ATT ON"
appears in the front panel display.
The output level is changed.
When you select "ATT OFF" and press x,
this operation will be canceled.
4
Press ENTER or AMP MENU.
The AMP menu turns off.