Advertisement
CLEANING
Make sure the unit is unplugged before cleaning. Allow all parts to COOL to the
touch, especially the roller assembly, griddle, and drip tray.
Before first use and continuing after each use, be sure to wipe off the roller
assembly with a damp cloth and dry thoroughly. When more concentrated cleaning
is necessary, wash in warm soapy water, rinse, and dry thoroughly.
To prolong the life of your HOT DOG ROLLER, hand-washing parts of parts is
advised. Dishwasher use is not recommended.
NOTE: To prolong the life of your OLD FASHIONED HOT DOG ROLLER WITH
GRIDDLE™, be sure to follow the cleaning instructions after every use and confirm
that the roller assembly is fitted properly in the base unit. DO NOT force it, or it will
strip the fitting and the rollers will not be able to be controlled for proper rotating.
Never use anything abrasive on the base in order to maintain the original finish.
TROUBLESHOOTING
Power Light does not turn ON.
Rollers are not turning.
Uneven heating.
Hot dogs are not rotating on the rollers.
BREAKDOWN
Non-stick
Griddle Pan
Canopy Top
Stainless Steel
Roller Assembly
4
Check electrical plug to insure it is fully
plugged in.
Make sure Power Light is On and the unit
is properly plugged in. Turn unit off and
on again. Make sure the end roller pin is
correctly engaged in the motor base
receptacle.
Switching the hot dogs from one side to
the other is helpful if this occurs.
Due to packaging of hot dogs, sometimes
the hot dogs are square in shape. Adjust
the hot dogs manually on the rollers, until
they begin to plump from cooking. They
will eventually even out in shape and
automatically rotate on the rollers.
Drip Tray
Motor Base
Adjustable
On/Off Heat
Control
Four Canopy
Poles
Advertisement
