Advertisement
Care and Cleaning
Removing
and Replacing
the Oven
Door
The door is heavy.
For safe, temporary
storage,
lay the door
flat with the inside of the door facing
down.
To prevent
possible
burns, do not attempt
to
remove
the oven door
until the oven has completely
cooled.
To remove
the oven
door.-
1.
Open
oven door completely,
horizontal
with floor.
2.
Pull up the lock located
on each hinge support
toward
front
of the oven. You may have to apply
a little upward
pressure
on the lock to pull it up (Figure 33 and Figure 34).
3.
Grasp
the door by the sides, pull the bottom
of the door up
and toward
you to disengage
the hinge supports.
4.
Keep pulling
the bottom
of the door toward
you while
rotating
the top of the door toward
the appliance
to
completely
disengage
the hinge levers (Figure
35).
Figure 32:
Door at horizontal
position
To Replace Oven
Door:
1.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(Figure 35).
2.
Holding
the oven door at the same angle
as the removal
position,
seat the hook of the hinge arm over the roller
pins
located
on each side of the oven door
frame
(Figure 35).
The hook of the hinge arms must be fully
seated
onto the
roller
pins.
3.
Fully open the oven door, horizontal
with floor
(Figure 32).
4.
Push the door hinge locks up toward
and into the oven
frame
on both
left and right oven door hinges to the locked
position
(Figure
33).
5.
Close the oven door.
Figure 33:
Door hinge locks
Important:
Special
Door Care Instructions
- Most oven doors contain
glass
that can break.
Do not close the oven door
until all the oven
racks are fully
in place. Do not hit the glass with pots, pans, or
any other object.
Scratching,
hitting,
jarring,
or stressing the
glass may weaken
its structure
causing
an increased
risk of
breakage
at a later time.
Figure 34:
Hinge:
unlocked position
Important
note:
These instructions
are for soft close hinge models.
Figure 35:
Holding
door for removal
31
Advertisement
