Fujitsu LifeBook T Series User Manual page 55

Problem
Audio Problem
There is no sound The Software volume
control is set too low.
coming from the
bulit-in speakers
Headphones are plugged
into your Tablet PC.
Software driver is not
configured correctly.
Sound could have been
muted with function keys.
Port Replicator Problems
Port Replicator AC
Tablet PC does not
turn on when adapter is not plugged in.
installed in optional
Tablet PC is not properly
Port Replicator
seated in the Port
Replicator.
Hard Drive Problems
You cannot access The setup utility is
incorrectly set for your
your hard drive.
internal (Primary Master)
or optional second hard
drive (Primary Slave).
The wrong drive
designator was used by an
application when a
bootable CD-ROM was
used to start the Tablet PC.
Security is set so your
operating system cannot
be started without a
password.
46
Possible Cause Possible Solution
Adjust the sound volume control settings in
your software, operating system and
applications.
Plugging in headphones disables the built-in
speakers, remove the headphones.
Refer to your application and operating system
documentation for help.
Press [F3] while holding the [Fn] key to toggle
the sound on and off.
Provide power to the Port Replicator.
Remove and re-dock your Tablet PC.
Revise BIOS settings to set both Primary
Master and Primary Slave correctly.
Verify drive designator used by application is
in use by the operating system. When the
operating system is booted from a CD, drive
designations are automatically adjusted.
Verify your password and security settings.