Optical Disc Drive Safety Instructions - Toshiba C50 Series User Manual

8
If you are uncertain of the policy that applies on the use of wireless
devices in a specific organization or environment (e.g. airports), you
are encouraged to ask for authorization to use the Wireless LAN
device prior to turning on the equipment.

Optical Disc Drive Safety Instructions

NOTE
Location of the Required Label
(Sample shown below. Location of the label and manufacturing
information may vary.)
Exposure to Radio Frequency Radiation
The radiated output power of the Wireless LAN is far below
the FCC radio frequency exposure limits. Nevertheless, the
Wireless LAN shall be used in such a manner that the
potential for human contact during normal operation is
minimized. The antenna(s) used for this transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.
This section is only applicable if your system has an Optical
Disc Drive.
This appliance contains a laser system and is classified as a
CLASS 1 LASER PRODUCT. To use this model properly,
read the User's Guide carefully and keep it for your future
reference.
Never attempt to disassemble, adjust or repair an optical
disc drive. You could damage the drive. You would also be
exposed to laser light or other safety hazards, resulting in
serious injury. Always contact an authorized Toshiba service
provider, if any repair or adjustment is required.