Table of Contents
Advertisement
4.6.3
PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
Scroll down to display the other BIOS items.
Hyper kit Mode [Disabled]
Enable this item for "ASUS Hyper kit" card, or disable this item for M.2 devices.
Configuration options: [Enabled] [Disabled]
SATAExpress_1 SRIS Support [Auto]
When set to [Auto], this item allows the system to automatically adjust the SRIS (Separate
Reference Clock Independent Spread Spectrum Clocking Architecture) support for connected
SATA Express devices. Set this item to [Disabled] to activate ASUS RUNWAY SATA
Express bridge card.
Configuration options: [Auto] [Disabled]
S.M.A.R.T. Status Check [On]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks.
Configuration options: [On] [Off]
ASUS ESC700 G3
4-35
Advertisement
Table of Contents
